CSFMC Products

Chiniot Safety Fuse manufacturing Company is the leading Industrial and Commercial Explosives & its  allied Blasting accessories  Manufacturer rendering services in Pakistan since 1989.

An Emulsion is the third and latest generation of the commercial explosives in the world. It has excellent performance, characteristics & flexibility in use. An Emulsion explosive is a water-in-oil emulsion consisting of a super-saturated solution of microscopic droplets and it sensitizes with entrapped air in the form of ultra- ne bubbles, dispersed throughout the emulsion which act as sensitizer. An emulsion explosive is a modern
technique of art in explosive’s family. It contains no raw material, which can be classified as explosive. Emulsion becomes explosive only in the final stage of its production. It is therefore safer to manufacture and handle than any other commercial explosives. This is relatively insensitive to accidental initiation by shock, friction or mechanical impact under normal conditions. Emulsion explosives are being used in soft medium and hard rocks, it is very suitable for tunnels & gassy mines etc. CSFMC has the pride in producing best quality Emulsion Explosive in the country which can be displayed in any trial.

Detail

Specification

Physical Appearance

Beige Color, fine powder form, homogeneous mixture.

Density

1.16 – 1.25 g/cc

Lead Block Expansion

300ml

VOD

3500 5500 m/s
Water Resistance

Excellent

Gap Sensitivity
50 – 100mm
Initiation Sensitivity
No.8 Cap.
Shelf Life

12 Months

Diameter/Size

25mm – 120mm & as per customer’s requirement.

Packing

25kg boxes, Film Tube

Storage

Store in dry and well-ventilated conditions.

Seismic explosive is not a different type of explosive than other emulsions. It is also one of the categories of these explosives with some changes in raw material composition; to enhance its e effective energy, velocity & shattering e effect. It is designed for seismic application & geological survey. Its packing is in rigid plastic capsules with the provision of inter-coupling to prevent the water penetration. Although the seismic explosives have excellent water resistance, but the hydrostatic pressure within the bore whole is too much and sleeping time is approximately four weeks. Emulsion Seismic explosives is also relatively safer in handling, transportation, charging & use than other seismic explosives. It is insensitive to accidental hazards by shock, friction or mechanical impact under normal conditions.

Detail

Specification

Physical Appearance

Beige Color, fine powder form, homogeneous mixture.

Density

1.25 – 1.35 g/cc

Lead Block Expansion

500ml – 550ml

VOD

5500 – 6000 m/s

Oxygen Balance

Near to zero

Water Resistance

Excellent

Gap Sensitivity

100 – 150mm

Initiation Sensitivity

Seismic Detonator No.8 Cap.

Shelf Life

12 Months

Diameter/Size

57mm

Packing

25kg boxes, Rigid Plastic Tube Lid.

Storage

Store in dry and well-ventilated conditions.

The ingredients of Water Gel explosives are based on solution of nitrates with 10 to 15% water. It is essentially thickened aqueous solution of oxidizer and fuel. The salt is dispersed, additionally oxidized and then sensitizers are added. Water Gel explosive is in the form of fluid, pumpable and essentially miscible with water. These are in the form of chemically cross-linked material of dough like consistency feature good water resistance and adjustable density. It is suitable for bench blasting, tunnel blasting & all types of mining. Water Gel is very safe explosives for handling, it is only detonate when initiate with no.8 cap.

Detail

Specification

Physical Appearance

Steel Gray Color, fine gel form, homogeneous mixture.

Density

1.2 – 1.35 g/cc

Lead Block Expansion

400ml

VOD

3000 – 5500 m/s

Water Resistance

Fair

Gap Sensitivity

50 – 80mm

Initiation Sensitivity

No.8 Cap.

Shelf Life

6 Months

Diameter/Size

25mm – 120mm & as per customer’s requirement.

Packing

25kg card boxes, Film Tube

Storage

Store in dry and well-ventilated conditions.

Seismic Water Gel Explosive is specially design for seismic application and geological surveys. Its efficiency is better than ordinary water gel explosives & velocity of detonation is more then 5500 m/s.
Seismic Water Gel Explosives is specially packed in rigid plastic tube with friction welding to prevent water penetration.

Detail

Specification

Physical Appearance

Brown Color, fine gel form, homogeneous mixture.

Density

1.30 – 1.40 g/cc

Lead Block Expansion

450ml

VOD

5000 – 5500 m/s

Water Resistance

Fair

Gap Sensitivity

50 – 100mm

Initiation Sensitivity

Seismic Detonator No.8 Cap.

Shelf Life

6 Months

Diameter/Size

57mm Rigid Plastic Tube with friction welding.

Packing

25kg card board boxes

Storage

Store in dry and well-ventilated conditions.

Gelatin explosives contain one ingredient that is classified as explosives. It is a soft consistency like dough and is suitable for blasting in soft, medium and especially in hard rocks. It is also recommended for coal mines as permissible explosives. Gelatin Explosive is sensitive to heat, shock, friction & impact. It is a highly brisance explosive and it blasts violently. It’s likely shuttering strength is much more than other commercial explosives. It is a cap sensitive product and is handled through special procedures.

Detail

Specification

Physical Appearance

Brown Color, fine powder form, homogeneous mixture.

Density

1.4 – 1.45 g/cc

Lead Block Expansion

410ml

VOD

4000 – 5800 m/s

Water Resistance

Good

Impact Sensitivity

60cm/kg

Gap Sensitivity

50 – 100mm

Initiation Sensitivity

No.8 Cap.

Shelf Life

12 Months

Diameter/Size

25mm – 120mm & as per customer’s requirement.

Packing

25kg card board boxes, Film Tube

Storage

Store in dry and well-ventilated conditions.

Seismic Gelatinous explosive is more or less like gelatin explosives as explained above, with little bit changes in material composition to enhance the effectiveness for seismic application & geological survey.

Detail

Specification

Physical Appearance

Brown Color, fine powder form, homogeneous mixture.

Density

1.45 – 1.50 g/cc

Lead Block Expansion

450ml

VOD

5500 – 6000 m/s

Water Resistance

Excellent

Impact Sensitivity

50cm/kg

Gap Sensitivity

100 – 150mm

Initiation Sensitivity

Seismic Detonator No.8 Cap.

Shelf Life

12 Months

Diameter/Size

57mm Rigid Plastic Tube Lid.

Packing

25kg card board boxes

Storage

Store in dry and well-ventilated conditions.

Sometimes, medium energy & velocity explosives are required for blasting in medium & soft rock. CSFMC has exclusivity of producing Powder Explosives (without Nitro Glycerin injurious to human health) to meet the blasting requirements of Sand stone, Limestone, Marble, Gypsum, Minerals & metals mining. It is a cap sensitive product and packed in different diameters, sizes & sacks as per requirements of our valuable customers. It is recommended for use in dry blast holes as column charge explosive.

Detail

Specification

Physical Appearance

Gray Color, fine powder form, homogeneous mixture.

Density

1.0 – 1.15 g/cc

Loading Density

1.10 – 1.20 g/cc

Lead Block Expansion

225 – 260ml

VOD

3000 – 3500 m/s

Gap Sensitivity

55mm

Initiation Sensitivity

No.8 Cap.

Shelf Life

12 Months

Diameter/Size
25mm – 120mm & as per valued customer requirement. Also Bulk in 25Kg Sacks.
Packing

25kg boxes/sacks

Storage

Store in dry and well-ventilated conditions.

Sometimes, medium energy & velocity explosives are required for blasting in medium & soft rock. CSFMC has exclusivity of producing Powder Explosives (without Nitro Glycerin injurious to human health) to meet the blasting requirements of Sand stone, Limestone, Marble, Gypsum, Minerals & metals mining. It is a cap sensitive product and packed in different diameters, sizes & sacks as per requirements of our valuable customers. It is recommended for use in dry blast holes as column charge explosive.

Detail

Specification

Physical Appearance

Gray Color, fine powder form, homogeneous mixture.

Density

1.0 – 1.15 g/cc

Loading Density

1.10 – 1.20 g/cc

Lead Block Expansion

225 – 260ml

VOD

3000 – 3500 m/s

Gap Sensitivity

55mm

Initiation Sensitivity

No.8 Cap.

Shelf Life

12 Months

Diameter/Size
25mm – 120mm & as per valued customer requirement. Also Bulk in 25Kg Sacks.
Packing

25kg boxes/sacks

Storage

Store in dry and well-ventilated conditions.

The Gun Powder/Black powder is the oldest known explosive since 12 century. It is a mechanical mixture of ingredients and pressed granular. It is specially designed for the manufacturing of Safety Fuse. The Gun Powder is classified as low explosive which produces rather fast deflagration than detonation. It is sensitive to impact, friction & spark and is used for manufacturing of Safety Fuse, Pyrotechnics, priming charge & delay compositions for smokeless powder.

Detail

Specification

Physical Appearance

Black color Granular form
Density

0.80 – 0.85 g/cc

Moisture Content

1.6 – 1.0 %

Lead Block Expansion

225 – 260ml

Buring Rate

90 – 130 s/m

Flashover Sensitivity

25mm Min.

Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

Safety Fuse PVC

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.

It is designed especially for application of salt, Gypsum & soft rock mining purposes. It is a ash sensitive product and directly ignited by Safety Fuse. It is also very sensitive to impact, friction & heat. Most commonly it is used in the form of different types of cartridges.

Detail

Specification

Physical Appearance

Garish Black color Powder form

Density

0.80 – 1.0 g/cc

Moisture Content

upto 5 %

VOD

800 – 1000 m/s

Explosion Temperature

2500 – 3000Co
Gassing Volume
280 – 300 liter/kg
Ignition temperature

200CO

Impact Sensitivity
70 – 100 cm/2kg
Packing

25kg sack & Plastic Container.

Storage

Store in dry and well-ventilated conditions.